Zack & Wiki: Mad Science (Part 1)

!: Zack & Wiki: Mad Science (Part 1)

Mad Science 1. Get rid of the rock. 2. Press B to look down and click on the snake. 3. Itemize it. 4. Shake the tree. 5. Itemize the Centipede. 6. Grab the Centi-saw. 7. Saw down the tree. Doesn't do anything but give you HQ. 8. Enter the building and climb down the ladder. 9. Enter the room on your right. 10. Put the Centi-saw inside the large machine. 11. De-itemize the Centi-saw and the machine will turn the Centipede into a drink. YUMMY. 12. Click on the vending machine and inspect the big image. In case you don't understand it: Each type of animal is given its own symbol. Reptiles get a curled up snake symbol, bird have a "v" symbol, insects get a "*", and mammals have an oval with 4 legs. 13. Grab the bottle of "Purple Shock" out of the vending machine. 14. Use it on the decapper on the bottom right of the machine. 15. Walk to the right of the big liquefier machine, and click on the desk with the orange bottle on it. Put the Purple Shock on the stand labelled "*". 16. Go back to the ladder. Before climbing it, why not use the water pump first, to get some water flowing? 17. Climb up the ladder and click on the bat. 18. Itemize it. 19. Grab the Batbrella. 20. Put it inside the machine. 21. De-itemize. 22. Grab and de-cap the Yellow Water. 23. In case you're wondering: Bats are mammals, so the Yellow Water goes on the stand with the legged oval label. 24. Look at the poster. You have enough potions for the upper recipe. 25. Follow the recipe: Put one unit of Purple ...

Zack & Wiki: Mad Science (Part 1)

Step2 Water Table For Sale Merrick Canned Food Cheap

Know Your Mini Moto

!: Know Your Mini Moto

The Mini Moto is a small scale replica of the World Super Bikes used by the likes of Valentino Rossi and ex champion Carl Fogarty. The Mini Moto comes equipped with either a two stroke air or water cooled engine which are, depending on the model, capable of speeds of up to 60Mph.

In this article I will underline the finer points of the components that make these speeds possible.

The two Stroke Engine

The two stroke engine produces more hp per pound than the four stroke engine. The two stroke engine consists of three moving parts, the piston, the rod and the crank. The piston acts as valve that opens and closes the intake and exhaust ports that are located on the walls of the cylinder. Unlike the four stroke engine that fires only every other time of the pistons movement, the two stoke engine fires every time the piston reaches the top of its travel. This means that the time spent generating power is doubled in the two stroke engine than that of the four stroke engine, as there is no engine coasting during passive cycles. This is the main reason that the two stroke engine can rev more highly and produce more power (for its size) that the four stroke.

Fuel

The two stroke engine needs to be run on a mixture of petrol and two stroke oil. This is so that the engine is kept lubricated whilst in use.

99% of all starting problems are caused by fuel problems. These can stem from bad or old fuel and improperly mixed fuel (please see mixing chart).
Do not use fuels that contain alcohol, as the can cause you bike to run 'lean'. Be advised some racing fuels contain alcohol and are best avoided..
We recommend that you use normal petrol for a garage and a quality two stroke oil.

A mixture that is too lean I.e not enough two stroke oil can damage your mini moto's engine as the moving parts are not properly lubricated. This can cause the engine to seize. However a mixture that is too rich can choke the engine and effect the performance and cause starting problems. You can tell if your mini moto is running too richly by the plumes of white smoke coming out of the exhaust and the lack of performance. A rich mixture (25:1) is needed to lubricate the engine during the 'run in' period, you may experience a lack of performance during this period. The pocket bike may run more slowly and acceleration can be sluggish, however when you change to a mixture of 50:1 you will really notice a difference. The leaner mix ignites in the combustion chamber faster and with a more explosive force than the richer mix. This means higher revs which means more power and acceleration.

We recommend that a fuel mixture of 25:1 is used to 'run in' you mini moto, and a mixture of 50:1 is used thereafter.

'Running in'

Your mini moto should be 'run in' for the first 3-4 tanks of fuel. During this period we recommend that you use a fuel mixture of 25:1. This means a mixture that is made up of 25 parts petrol to 1 part of two stroke oil. During the 'running in' period be careful to not rev the engine to its maximum as this can damage the engine. The 'running in' period will allow the moving parts to become well oiled and the clutch and brakes to 'bed' themselves in. After you have run the minimoto on this fuel mixture for 3-4 tanks, check the chain and tighten accordingly, check the tyre pressure, tighten the bolts on the brakes, forks and wheels. You may also need to readjust the throttle settings to allow for the higher revs that changing to a leaner fuel mix produces. The bike should now be ready for a fuel mixture of 50:1.

Clutch

The mini moto uses a centrifugal clutch to power the drive the sprocket, which in turn drives the back wheel of your mini moto.

When you start your mini moto the clutch spins as the engine ticks over . The clutch is engaged when you pull back on the throttle. The increase in speed of revolution of the clutch makes the clutch expand and grip the inside of the clutch bell which turns the sprocket that drives the back wheel of your pocket bike.

The clutch can be set up in different ways depending on the type of performance that you want from your minimoto. Adjustable clutches are not standard on mini moto's but an after market Polani or Blata style adjustable clutch can be used in your new mini moto. These allow the rider to adjust the mini moto's set up in according to their preference. Setting the clutch to engage too late when the engine has built up too much power may cause the clutch to slip and never fully engage. This can result in excessive wearing. However setting the clutch to engage too early, before the power has built up in the engine can cause your pocket bike to 'bog down', resulting in slow acceleration. The perfect set up is to get the clutch to engage just as the engine has built enough power to rocket the mini moto away, but without making the clutch slip, this is achievable through trial and error.

Spark Plug

Making sure that your spark plug is fresh is important in a two stroke mini moto engine. You can tell a lot from the colour of the spark plug. The top part of your spark plug is covered in ceramic insulator which, when brand new is white. This part of the spark plug can change colour according to how your engine is running. The plug should appear as a nice tan colour when the engine is running perfectly, this indicates complete combustion. A greyish or white colour indicates that the engine is running too lean which can result in engine damage. In this case you should clean and check your fuel system for any obstruction, check your fuel mixture, check for loose intake manifold bolts and carburettor mounting leeks, faulty gaskets and leaking crank seals. Anywhere that your engine could potentially leek and suck in fresh air can be the source of a lean condition.

A blackened or oily spark plug indicates improper combustion and is the result of running too rich. This can be caused by too much oil in the mixture or the spark plug could be faulty and misfiring. Check the fuel mixture and replace the spark plug.

Air Filter

Your new mini moto is equipped with an air filter. Some bikes such as the B1 Origami rep liquid cooled and the Mini Dirt bike have a 'cone' style K and N style air filter. The 2005 mk2 mini moto and the B1 Origami Replica air cooled bikes have a standard mini moto air filter. Both air filters purify the intake of air that is sucked into the carburettor. This means that the air filter should be cleaned regularly as the mini moto's performance can begin to suffer as the engine can become starved of air if the air filter is choked with debris. To reach the air filter, remove the bikes bottom fairing, remove the protective cover by unscrewing the holding screws. Clean the air filter in petrol but make sure that the filter is dry before reattaching to you mini moto.

Tyres

The tyres on your mini moto are filled with air (pneumatic). Please consult your mini moto handbook for the appropriate psi. It is important to check the tyre pressure regularly, an under inflated tyre will affect the performance of your mini moto, acceleration can become sluggish and cornering can become dangerous.

Chain

Before riding your mini moto you need to make sure that the front and back sprockets are aligned and that the chain is perfectly straight running between them. Once you have established this make sure that the chain is tensioned correctly (please see your mini moto handbook). To test the tension of the chain you can manually push the pocket bike, if you hear a 'pinging' or 'popping' sound the chain is too loose. If the chain is noisy and starts to bind the chain is too tight.
Make sure that the chain is well oiled. The chain needs to be oiled before every ride.

Gearing

The gearing of you mini moto is dictated by the number of the teeth on the front sprocket and on the back sprocket. The sprockets can be changed as an easy way to manipulate top end speed and acceleration, quite like changing gear on a mountain bike. A front sprocket with more teeth will improve acceleration, however the top end speed will be reduced. A larger rear sprocket will produce a higher top speed but acceleration will suffer. The gearing on your bike can be adjusted in accordance for the track you are intending to ride I.e. a small track with a lot of bends will suit gearing for improved acceleration, however a track with long straights will require a mini moto that is geared for a higher top speed.

Throttle

The throttle on your new mini moto is a 'twist grip' style throttle. When you twist the throttle the throttle cable is pulled back revving the engine. It is important to keep this cable free from obstacles and clean. If the throttle begins to feel 'loose' of 'gives', the tension of the cable can be adjusted via the adjusting screw.

Brakes

The brake system comprises of brake levers, brake cables, brake callipers and brake discs.

The brakes on your mini moto are operated by levers found on the handle bars. The right hand brake controls the front brake, and the left controls the back brake. Pulling on the handle pulls the brake cable which in turn pulls the lever located on the bake calliper. This action pushes the brake discs towards each other. This creates friction on the brake disc which slows down or stops the bike.

The brakes can be adjusted in the following ways.

The brake cable can be tensioned using the adjustment screw found on the brake lever. Unscrew the locking nut, twist the screw to reach the desired tension. Re screw the locking nut.

This is a two person job. Adjust the screw on the hand brake so that is at the end of its travel. Undo the clamp that holds the brake cable on the lever located on the brake calliper. One person needs to push the lever forward as far as it will, the second person needs to pull back on the brake cable and re fasten the clamp. The crake cable will now be highly tensioned.

Pull Start

To start the mini moto pull slowly to turn the fly wheel. This pumps some fuel around the engine, which lubricates the moving parts. Pull the pull start firmly in order to start the engine. Important, do not pull the cord to the end of its run as it can break. If the mini moto does not start check the choke and the throttle cable.

Choke

The choke controls the amount of air that is allowed into the air/fuel mix. The choke is adjusted via a lever located on the side and back of the engine. The choke is off when the lever is down, and on when the lever is up.
When you start the mini moto the choke should be on, when the mini moto is warm and ready to ride the choke needs to be off.

Carburettor

It is recommend that any adjustments to the carburettor are made by a professional. The carburettor pumps and mixes the fuel and air. The small diaphragms, orifices and ports mix the air and fuel very precisely, this process demands clean fresh fuel.

Jet

The jet can be adjusted by the screw located in the access hole to the right of the choke lever. The jet is adjusted by the manufacture however the conditions of where you wish to ride may be different, which means that you will need to make adjustments. Turning the screw clockwise will make the bike run with a leaner mixture, and counter clockwise will richen the mixture. Only adjust the screw 1 tern a at time and then test the mini moto, this is trail and error. Please note that it is best to find the optimum setting for performance and then run a slightly richer mixture as a mix that is too lean can seize the engine.

Know Your Mini Moto

Liftmaster Dealers Discount Hydroponic Drip Systems Clearance Sale Secrets Sheer Curtains

Ford Water Pump Technical Help Video

!: Ford Water Pump Technical Help Video

Family owned and operated for over 40 years with over 75000 satisfied customers. Rated #1 Click on blue link www.enginefactory.com Engine Factory Ford Division Technical Help Video for Ford Water Pumps and Harmonic Balancers, Produced by enginefactory.com. Home of the most complete Live Run Turn Key Crate Engines. Chevy and Ford Performance engine.

Ford Water Pump Technical Help Video

Tamari Almonds For Sale

Rio 20HF HyperFlow Water Pump - 1290 GPH

!: Buy Rio 20HF HyperFlow Water Pump - 1290 GPH free shipping

Brand : Hyper flow
Rate :
Price : $78.51
Post Date : Dec 06, 2011 22:00:25
Usually ships in 24 hours

Professional grade water pump with new power magnetic vortex rotor blade technology. Drive shaft is made of hardened ceramic and runs on ceramic bearing inside the impeller. Compact pump with more output power, only comparable to an external MD water pump. Energy effecient water pumps, with excellent gallons of water flow per watt of power used. Can be used for water circulation and comes with all attachments to operate as a main filtration pump. 1290 gallons per hour. 60 watts. Maximum head - 10.8 foot. Output tubing size - 3/4 or 1 inch.

Low Cost Ionic Hairdryer Low Price Bookcase Headboards

Prevent Basement Sump Water Flooding With a Battery Backup Sump Pump

!: Prevent Basement Sump Water Flooding With a Battery Backup Sump Pump

The story is all too common. You have just invested thousands of dollars to finish your basement. Following a spring storm and power outage, you walk downstairs to discover the horror: your newly remodeled basement is now full of water. The culprit? A failed sump system that has allowed water to backup and create a nightmare of a mess.

While we get calls here at ProMaster Home Repair & Handyman of Cincinnati for this very scenario all spring and summer, this nightmare is largely preventable. Sump pump failure, whether do to power outage or pump mechanical failure is an extremely common problem for homes in Cincinnati, as most of them have a sump pump system to either remove excess foundation water or eject condensate from indoor appliance drains. Given the importance then, of a sump pump system to remove water from the basement, one must consider the prospect of its failure.

How a Battery Backup Sump Pump Saved Me

Before I share the details of how a sump pump system will prevent sump failure, allow me to share a quick story. For many years during my military service, I was stationed in Grand Forks, North Dakota. For those who have been to the eastern part of North Dakota know that the geography is flat and extremely wet. Like homes built in Cincinnati, our home in North Dakota had a full basement. The problem, however, is that the soil's water table would often reach as high as 4 feet below grade. Consequently, our sump pit collected water from the drain tile around the foundation of the basement about 9 months out of the year-whether it rained or not! It wasn't until the ground froze sufficiently that the sump would stop. Without a properly functioning sump system, our basement would have become an underground swimming pool.

The problem of ground water was so pervasive in this area that it wasn't uncommon to see several sump systems installed in or around a home's basement. Homeowners typically purchased backup electric generators not to keep their refrigerators running during a power outage, but to keep their basements from flooding. After my wife and I experienced several power outages ourselves followed by basement flooding, we knew that we could not finish our basement without figuring out a way to automatically backup the sump pump should it or its power source fail.

That is when I discovered that several manufacturers were producing battery-powered backup sump pumps. These units incorporate a small "emergency" pump powered by a 12 volt deep cycle marine battery to operate when the primary sump pump either fails or loses power. Governed by a separate electronic control head and float switch, the battery backup sump pump system operates autonomously, requires precious little maintenance and alerts the homeowner any time the primary sump system fails.

The battery backup sump pump system saved my basement on numerous occasions whether from a mechanical failure of the sump pump, or the occasional storm-related power failure. The thousands of dollars saved (not to mention hassle) is well worth the cost of the system. Since then, I swore that I would never own a finished basement again without a battery backup sump pump.

Battery Backup Sump Pumps - Easy to Install, Simple to Maintain

Conceptually, these battery backup sump systems are extremely simple. They provide a completely redundant pump, power source and check valve to the existing sump pump system-thereby "backing up" the major causes of a sump failure. The electronic control head of the battery backup system includes an AC power adapter that plugs into the wall, keeping the deep cycle battery topped off with a full charge until it is needed. These kits also contain a separate float control switch to activate the pump should the water level in the sump pit rise too high. Irrespective of the reason why the sump water backs up (primary sump failure, power outage, check valve failure, or excessive water flow from a storm) the battery backup system will activate and eject the water out of the home instead of flooding the basement.

Given that battery backup systems are extremely inexpensive, simple to install and easy to maintain there is frankly no excuse for a homeowner not to install one. Basic units with battery and materials can be purchased for under 0 and the average do-it-yourselfer can install the system themselves with a few simple hand tools in under 2 hours. Larger systems that tout higher volume pumps and longer battery backup run-time can cost several hundred dollars more. For those who rely on a professional to maintain or repair their homes, a basic system can typically be installed for under 0.

Backup Sump Pump = Peace of Mind

If your home has a sump, odds are it will fail at the most inconvenient time possible. Given that most of the power lines here in the Cincinnati area are above ground, we are susceptible to thunderstorm-related power outages. It is during these heavy downpours when a sump system must function to keep the basement dry. Therefore, a battery backup sump pump system is a must for any home that relies on its sump to eject excess foundation water.

Since sump pump failure and water backup is an almost certainty for most homes and most homeowners insurance policies have deductibles in the 0 to 00 range, installation of a battery backup sump pump makes financial sense. The cost of preventing the problem is usually less than the insurance deductible! Not to mention the peace of mind knowing that your basement and its belongings are protected from water damage.

Prevent Basement Sump Water Flooding With a Battery Backup Sump Pump

Low Cost Cohesion Gaming

Backup Sump Pump Review - What is Right For You?

!: Backup Sump Pump Review - What is Right For You?

What is a Backup Sump Pump?

A backup sump pump is another pump that is installed to operate should the primary sump pump fail. Surprisingly enough there are many reasons a primary pump may fail including: electrical power outage, float or switch failure, broken impeller or drive shaft, clogged intake screen.

What Factors Should Be Reviewed?

There are eleven major factors to consider when comparing backup sump pumps: power source, charger strength, trigger, dependability, material used in construction, operational capability, dimensions, size of discharge, protection against solids or sludge, alarm notification, and manufacturer warranty.

1. Power Source

The backup system installed should be sourced by something other than electricity.

What are the different types of power sources used?

A Battery provides the power to enable a backup sump pump plugged into it through the use of a wired housing case to perform the pumping cycle for the removal of the water from the pit. Twelve or twenty four volt battery power is used. The voltage and type of battery required varies by manufacturer. Water Pressure provides the power to keep a backup sump pump running. The water used must come from a municipal source and have a pressure between 40 and 100 PSI (pounds per square inch). A portable generator provides power through the conversion of gas or propane into energy. The pump must be plugged into the generator. Automatic start standby generator provides the power when the sump pump is plugged into it.
What are the advantages and disadvantages of the different power sources?

Batteries require monitoring to make sure they are operational in the time of need. Most backup systems have an alarm that lets the owner know when a battery requires maintenance or replacement and is being used by the backup pump. Batteries are rechargeable. Water power requires no batteries and has no moving parts. Operation of watered power systems requires a PSI water pressure between 40 and 100 PSI (pounds per square inch). Private well water cannot be used and the municipal provided water must have reliable water pressure. It takes 1 gallon of municipal water to remove 2 gallons of sump pit water so can be costly to operate. Portable generator: The generator must be placed outside. It must be started manually. Most operate from propane tank. Automatic start standby generator: They are expensive to purchase and install (four to ten times more expensive than battery power) but are very reliable. This type of generator runs off of natural gas or propane tanks and can provide power to multiple household appliances during power failure.
2. Charger Strength

This term applies when batteries are used as the source of power.

The higher the charger strength the faster the battery will be recharged after usage. Charger strength varies from.4 to 20.
3. Trigger

Each backup system has a trigger that activates the non electrical power source to begin operation.

What are the different triggers?

For battery powered backup sump pumps, when the water level raises the float, the battery is activated into operation. For water powered backup sump pumps, when the float raises, a valve allows pressured water to flow down to the pump. The flowing of the pressured water activates the backup system into operation. An automatic start standby generator is activated when the transfer switch senses a utility power interruption. A portable generator becomes operational when a human starts it.
What are the advantages and disadvantages of each trigger?

The transfer switch for the standby generator is the most reliable and quickest way to activate the operation of a backup system. The backup pump is operational as soon as the power goes out. Battery and water powered systems are not activated until the water rises to the height of the float. That means water has already collected in the pit.
4. Dependability

Batteries deplete and loose charge. Municipal water pressure is not constant. A drop below 40 PSI means the backup system is not operational. The float-switch mechanism, impeller or clogging of the backup sump pump plugged into a battery or standby generator source of power could fail. The tether switch is not as dependable as the vertical switch. Dual vertical switches offer twice the reliability.
5. Materials Used in the Construction of Backup Sump Pumps

What are the different materials used?

Thermoplastic: Outer casing is made of a hard, durable plastic. Cast Iron and Stainless Steel: The outer casing and bolts are made of metal.
What are the advantages and disadvantages of the different materials?

Plastic weighs less and is cheaper. Cast iron and stainless steel lasts a lifetime, weighs more and is constructed to handle heavy duty usage. This material is more expensive.
6. Operational Capacity

What are the volumes at which backup pumps can discharge water?

Pumping capacity is measured by number of gallons per minute or hour at a specific rise. Capacity is determined by size of motor and source of power.
What are the advantages and disadvantages of operational capacity?

Larger motors using battery or generator power move more water during operation. Smaller motors move less water during operation and require less battery or generator power. The amount of water moved during operation of a water powered backup sump pump is determined by the municipal water pressure. The greater the pressure the greater volume of water that is discharged. Generally water powered pumps have a lower operational capacity.
7. Dimensions of Backup Sump Pump and Pit

Each backup sump pump has unique measurements.

A sump pit with an 18"diameter basin or larger provides the greatest flexibility in being able to fit a primary and a backup sump pump into the pit. A tether float requires a larger diameter-based pit than a vertical float.
8. Size of Discharge Port Diameter

What are the different sizes?

The size is either 1 ¼ or 1 ½ inches in diameter. Most backup pumps have an adapter to accommodate either size of PVC piping.
What are the advantages and disadvantages of the different sizes?

The capability to adapt to either a 1 ¼ or 1 ½ inch size PVC pipe is extremely beneficial. A size of 1 ½ inches is required to handle heavy volumes of water.
9. Protection against Debris, Sludge, or Spherical Solids

Backup pumps use screens to protect against particles. Those with the additional protection of float cages are built so the cage bottom concaves causing particles to run off.
10. Alarm notification

Each of the battery backup sump pump systems have audible alarms that sound when the battery is activated when backup sump system is running. The alarm also sounds when the battery is discharged.

The Basement Watchdog Backup series also has an audible alarm when the battery fluid levels are low.

11. Manufacturer Warranty

What manufacturer warranties exist?

Some have no warranty Others have one, two or three years
What are the advantages and disadvantages of a warranty?

No warranty may mean manufactures are very confident of product quality. The purchase price of the pump may be higher because the cost of warranty is included. Limited warranties will not pay the entire cost to fix or replace. The length of warranty is usually based on the length of time most of the pumps like it are known to operate without failure.
How Can You Determine Which Backup Sump Pump System Is Best for You?

The following FAQ are provided to help you make your decision.

Are you concerned about other household circuits, experience electricity failure frequently and for long periods of time, and have no ordinance limitations regarding the placement of a 48" (L) x 25" (W) x 29" (H) box outside your home?

The automatic start standby generator can provide the most reliable power for a backup sump pump system as well as other household items. Is your water provided from municipal water source and it is reasonably priced?

Water powered backup systems only work with municipal water source not private well sources. It takes 1 gallon of municipal water to pump out 2 gallons of sump pit water. Are you concerned about backup sump pump float-switch failure during operation?

The Watchdog Big Boy, Watchdog Special and Watchdog Emergency Backup systems have a vertical dual float switch. If one float-switch fails the second one begins operation. The float-switch mechanism can also be replaced without removing the backup pump from the pit. Wayne, Little Giant and Zoeller use vertical switches which are more reliable than the tether floats used by Simer Ace in the Hole and Flotec. Are you concerned with time required to recharge the battery after usage?

The Watchdog Big Dog provides the quickest recharging. It has a 20 amp charger. Little Giant and Simer Ace in the Hole have 2 to 3.5 amp charger. Flotec and Zoeller have 8 to 10 amp charger. Are you concerned about notification of battery depletion or failure?

All major brands include this feature. Watchdog Backup systems provide the most detailed warnings regarding the battery backup system. Is a warranty important?

Wayne offers the longest warranty of three years. The other major brand warranties range from one to three years. Are you concerned about how many hours the battery will run continuously?

The continuous run time for all the major brand battery backup sump pump systems is within the range of six to nine hours. Simer Ace in the Hole runs continuously for six hours; Little Giant runs for nine hours; Wayne, Zoeller and Watchdog run for approximately seven hours. Do you have a sump pit diameter under or over 12"?

The Watchdog pumps have the smallest width (9") and require only ¼" additional for the vertical switch. In most cases backup sump pumps are installed on top of the primary sump pump so size is not as much of an issue. Do you want to exchange a faulty float/switch mechanism without having to remove the entire pump from the sump pit?

The Watchdog sump pump float/switch mechanism is external to the pump so the float-switch can be replaced without removing the pump from the sump pit.
Check Out These Backup Sump Pump Systems Today

Your home is an important asset. Make sure it is protected against water damage. It is cheaper to buy good backup sump pump systems than to clean up after a sump pump failure during a heavy rain storm. Be prepared before those heavy rains come.

Backup Sump Pump Review - What is Right For You?

Where To Buy Caramel Filling Knitting Patterns Ponchos Comment Dyson Vacuum Cleaner Dc15

SHURflo 2088-492-444 Park Model Fresh Water Pump

!: Shop For SHURflo 2088-492-444 Park Model Fresh Water Pump ideas

Brand : SHURflo
Rate :
Price : $132.52
Post Date : Nov 19, 2011 19:15:22
Usually ships in 24 hours

This legendary pump has set the standard for the RV Industry. SHURflo’s 2088 pumps are equipped to deliver high performance and reliability every time they are used. SHURflo’s potable water pumps operate three independent pumping chambers which allow the pump to self-prime and lift water up to 12 feet. With smooth flow and uninterrupted operation, the Classic™ Series pumps include a built-in check valve to prevent back flow into the tank. Each pump features an adjustable switch and has the capability to run dry without damage to the pump or motor.

Keurig Decaf Order Low Cost Heat Pads For Pain Relief 400 Mw Laser Pointer

!: Buying Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump guide

Brand : Wayne | Rate : | Price : $78.28
Post Date : Nov 12, 2011 08:03:28 | Usually ships in 24 hours

Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump

• 1/2-horsepower submersible utility water pump can handle material up to 1/2-inch thick without clogging
• Removes water within 1/8-inch of surface
• Glass reinforced housing prevents rust
• Connects to garden hose with 3/4-inch adjustable discharge adapter
• 1-year limited warranty

More Specification..!!

Wayne Water Systems VIP50 1/2 HP 2,500 GPH Submersible Utility Water Pump

Skylight Blinds Tips Wiki

Water Pump Project Part 6

!: Water Pump Project Part 6

Almost finished. My homemade water display using pumps from Poundland,old paper waste bin,offcuts of wood, new taps and belt, few screws,fence/shed paint,rubber door stops as feet,washing machine hoses and clips. Well it works by hand but the centre v pulley is not very well centred. This should all be ideal for fitting to my little BSA Stationary engine.

Water Pump Project Part 6

Chocolate Coins Cheap Last Minute Shindaiwa Leaf Blower

Mercruiser Alpha I Water Pump Inspection

!: Mercruiser Alpha I Water Pump Inspection

How I check out a lower unit for a mercruiser. Check out my channel for more videos like it. Make sure you subscribe

Mercruiser Alpha I Water Pump Inspection

Antique Chandeliers

!: Best Prices Wayne PC4 1/2 HP 115-Volt Transfer Water Pump, Cast Iron cheap

Brand : Wayne | Rate : | Price : $122.00
Post Date : Oct 24, 2011 15:48:19 | Usually ships in 24 hours

Wayne PC4 1/2 HP 115-Volt Transfer Water Pump, Cast Iron

• 1/2 HP transfer water pump can be used to increase line pressure up by up to 40 PSI
• Use to pump out flooded basements, tanks, or boats
• Made from durable cast iron steel
• Connects to garden hose with 3/4-inch brass hose connections
• 1-year limited warranty

More Specification..!!

Wayne PC4 1/2 HP 115-Volt Transfer Water Pump, Cast Iron

Top 10 Solar Water Fountain Pumps Mccullough Electric Chainsaw Help

WATERWHEEL PUMP

!: WATERWHEEL PUMP

Pete shows an experimental waterwheel pump which was built a year ago.Built from scrap it fills a pond with , capable of lifting water a good height.

WATERWHEEL PUMP

Low Cost Homelite Electric Trimmer Interview Arched Floor Lamps

How to Select the Suitable Water Pump

!: How to Select the Suitable Water Pump

What is water pump? Generally speaking, the equipment that can raise the liquid, transmit the liquid or make the liquid increase the pressure can be called pump. The so-called pump changes the mechanical energy of the prime motor into liquid energy and thus realizes the purpose of pumping water. This equipment is widely used in all kinds of industries, such as water supply, construction, agriculture, electric station, chemical, petroleum, shipping and so on.

Owing to different functions, different liquid medium and different flow rates the structures of the water pump are certainly various. According to the working principles, it can be separated into spiral one, magnetic one, sliding vane one, axial one, wheel one, steam one and so on. On basis of functions, it can be classified into clarified water one, dredge one, chemical one and oil transfer one. There are also other ways for the classification of this equipment. For example, it can be separated into single stage one and multi-stage one according to the impeller connection.

Because there are so many kinds of Water Pump, it is of great necessity for people to know how to choose the suitable one. Here some suggestions will be introduced in the following. What comes first is to select the manufacturer carefully and consult the old users. When the user select the water pump, it is better to choose the point of sales which is approved by the agricultural machinery department. Meanwhile, the user should remember not to buy the product without manufacturer, production date and certificate. Or else, if the user meets the problem, he or she will be at a loss what to do. To consult the old user before buying the product is also wise way for the user.

Secondly, select the water pump that satisfies the requirement of pump lift. The so-called pump lift is the required pump increase, not the water lifting height. It is very important for the selection of the water pump. The pump lift is about 1.15 or 1.20 times of the water lifting height. When selecting the product, the customer should remember that the pump lift in the name plate is close to the required pump lift and the deviation is less than 20%. Under this situation, the efficiency of the water pump is highest and relatively economic. Thirdly, select the water pump with the proper flow rate. The flow rate can not be too great. Or else, the cost of the product will be increased. The used should select the product on basis of the need. For example, it is suggested to select the water pump with small flow rate if it is used in the household.

How to Select the Suitable Water Pump

Tiffany Piano Lamps Coupon Ryobi String Trimmer Reviews Garden Bakers Rack Answer

Rain Machine

!: Rain Machine

Short Surrounding of the installation RAIN MACHINE. The Rain Machine is a kind of assembly line for a chiefly natural event: rain. As long as the wheather forecast influences our lives, we wish to be able to control this natural outcome. While scientists work with lots of efforts on large-scale projects to save the climate, the global industries do not cede to ignore the "wheather" an its preconditions in order to produce an endless stream of goods and images of convenience. In this context the Rain Machine questions the sense of production. By showing a model of an apparatus that produces not more than ever circulating rain - besides a disturbing mix of humming sounds, dazzling and glaring lights - the visitor may be left not only with taste of cool air after the rain has gone. Technical description: Provided with a movement sensor, the RM reacts upon the approaching visitor. Once the sensor is activated, a coloured spinning light starts to indicate an automatic process: an immersion pump sends water through the pipes of the system, located on the RM. After a number of ventilated water is random chatter drops that hit the roof, as the membrane. amounts of water - collective action - at the pump and continue to flow into the sensor terminates the process. Raindrops go for a few minutes, then disappear.

Rain Machine

!: Stuart Weitzman Thigh High Boots Immediately !: SIMICHROME POLISH EA/SIMICHROME POLISH 1.76 oz 1.76 OZ TUBE by SIMICHROME POLISH !: Interview Credit Counseling Columbus Ohio

Irish technology vacuum tube

!: Irish technology vacuum tube

www.heating-solutions-ireland.com heating-solutions-ireland.com Jack Foley B.Eng 086-3823062 Solar Panels Explained By SEI (Sustainable Energy Ireland) Solar Panels, also known as "collectors", can be fitted to a buildings roof. They use the suns heat to warm water, or another fluid, which passes through the panel. The fluid is then fed to a heat store (eg a hot water tank) and helps provide hot water or a source of hot water for the buildings central heating system. Solar panels work throughout daylight hours, even if the sky is overcast and there is no direct sunshine, which means they can make a useful contribution even during the winter by pre-heating the water in the storage tank. Your boiler or heat pump will boost the water temperature. The cost of a professionally installed solar system can vary greatly. If you are considering investing in this technology you should do sufficient research to ensure that you are getting the best system for your needs and value for your money. A solar water heater is composed of A solar collector which absorbs solar radiation (sunlight) and changes it into heat; A pump which transfers the heat from the collector to hot water in a storage tank; The storage tank accumulates the hot water produced by solar energy so that it can be stored for use when needed; A number of accessories which ensure the regulation and the safety of the system; A back-up heater (gas, oil, or wood fuelled boiler, immersion heater or heat pump) which will be ...

Irish technology vacuum tube

!: Comment Anti Bark Shock Collar

Hot Water Therapy Pump (Standard Package)

!: Best Buy Hot Water Therapy Pump (Standard Package) Shop for

Brand : PMT MEDICAL | Rate : | Price : $229.99
Post Date : Apr 11, 2011 00:40:04 | Usually ships in 1-2 business days

Hot Water Therapy Pump (Standard Package)

It is an automatic hot cold therapy system that delivers instant heat through patented wraps that go around your feet and hands to provide greater circulation and to reduce pain.Athletes with chronic pain or injuries may use heat therapy before exercise to increase the elasticity of joint connective tissues and to stimulate blood flow.The aqua-relief hot therapy system used for:back,knee,hip,foot and ankle,hand and wrist,shoulder,elbow,chest,breast,face and jaw,head,neck,feet,hands,and other specific applications.The warm water greatly improves circulation and provides relaxing therapy.The cold water therapy system can also be set to cold to relieve swelling and edema or to help aid in injury recovery. Cold therapy with ice is the best immediate treatment for acute injuries because it can reduce swelling and pain.Cold water therapy is also helpful in treating chronic pain.Disclaimer(Please Read):I am currently under the treatment of a physician who has prescribed this ARS or AIS product. I will read and completely follow all directions provided by the manufacturer, as well as instructions from my physician regarding treatment times, and protocols. I understand that I will assume all responsibility for the use/misuse of this product. I will contact my physician immediately in the case of any unusual reactions caused by the use of this unit. I understand that Healio Health/Helio Living is only a distributor and in no way assumes responsibility for any injury it may cause due to malfunction, misuse, inappropriate application, or other reason. By clicking add to cart you certify that the above statement(s) is/are true.**please note: cold therapy parts come in contact with water which may contain bacteria that can come in contact with skin/incisions. By regulations, we cannot accept returns on cold therapy units/parts unless there is a problem with their operation. In which case if the unit is still within its warranty period it will be replaced with a new one.

More Specification..!!

!: Learn Vegetarian Weight Loss Meal Plans !: Frye Carmen Boot Free Shipping !: The Book Thief by Markus Zusak

3.8L 12V Mini DC submersible Water Oil Pump for CPU Cooling Small Pond or HHO System

!: Best Prices 3.8L 12V Mini DC submersible Water Oil Pump for CPU Cooling Small Pond or HHO System discount

Brand : Lightobject | Rate : | Price :
Post Date : Apr 07, 2011 03:56:49 | Usually ships in 1-2 business days

This is a high quality made, mini submersiblewater pump. It's built by a brushless motor providing smooth and quiet operation than a non-brushless water pump. Plus,it will not generate 'electric spark' like what a brush type does so it's more safe. It can be used to pump oil as well (no gasoline*)

Specification
Input: 9V-12VOutput: 3.8L/m Range: 2.5M (8ft horizon) @12V
Current: 500mA@12V
Intake: 13.8mm/9mm Dia.
Outlet: 7.2mm/5mm Dia.
Life span: > 20,000hrs@ 1600rpm~4200rpm
Noise: << 30dB
Working Temp: 70'C
Envir Temp: <40'C
Size(L*W*D): 2.36"x1.3"x1.6" (59mm X 33mm X 41mm)
Weight (net): 5.0oz

Warning: Do not run dry!

• Brushless motor: generate no electric spark
• Quiet:noise less than 30dB
• Quality built: 20,000hrs
• Lower consumption: 500mA@12V
• Light weight: 4oz

!: Buyers Mice Repellent !: Candlestick Lamps Help

Heart Diseases- Causes, Symptoms,types, Prevention & Treatment of Heart Diseases

!: Heart Diseases- Causes, Symptoms,types, Prevention & Treatment of Heart Diseases

Beside cancer, heart disease kills more than 2,000 Americans everyday. Approximately 60 million Americans have heart disease.
I. Causes of Heart Diseases
There are many causes of heart diseases. Most of heart diseases are caused by high blood pressure contributes to hardening of the arteries. High levels of bad cholesterol (LDL) build up in the arteries as a result of uncontrolled diet with high levels of saturated fat and trans fat. All these add to the formation of atherosclerosis lesions and eventually arterial blockage or anything that serves to damage the inner lining of blood vessels and impedes the transportation of oxygen and nutrition to the heart can be defined as a risk of heart disease.

II Symptoms of Heart diseases
Beside cancer, heart disease kills more than 2,000 Americans everyday. Approximately 60 million Americans have heart disease. There are many causes of heart disease. Anything that serves to damage the inner lining of blood vessels and impedes the transportation of oxygen and nutrition to the heart can be defined as a risk of heart disease. Here are some early indication of heart disease symptoms:
1. Leg cramps during walking
Leg cramps during exercise might be caused by dehydration. It is important to drink a lot of fluid during exercise. Leg cramps occur when the muscle suddenly and forcefully contracts. The most common muscles to contract in this manner are muscles that cross two joints. Leg cramps during walking might be an indication of heart disease caused by arteries in your leg being clogged up by cholesterol in result of not enough oxygen being delivered to the cells in your leg. If this symptom persists, please consult with your doctor.
2. Chest pain
Chest pain is caused by blood vessels in the heart temporarily being blocked up. It is also caused by inadequate oxygen supply to the heart muscle or coronary . The persistence of chest pain would be an early indication of heart diseases.
3. Shortness of breath
Shortness of breath (dyspnea) is the major symptom of the left ventricular insufficiency. People with shortness of breath are four times more likely to die from a heart disease related cause than individuals without any symptoms.
4. Headaches
People see sparkling zigzag lines or loss of vision before a migraine attack may be at particular risk of future cardiovascular problems. Generally headaches do not cause heart diseases but a sudden, explosive onset of great pain might be.
5. Dizziness
Dizziness can have many causes including low blood count, low iron in the blood stream and other blood disorders, dehydration, and viral illnesses. Since there are many different conditions that can produce these symptoms, anybody experiencing episodes of severe headaches or dizziness ought to be checked by your doctor.
6. Palpitations
Palpitations is an extremely common symptom of heart disease. Palpitations are skips in the heart beats and irregular heart beats.
7. Loss of consciousness
It is a common symptom, most people pass out at least once in their lives. However, sometimes loss of consciousness indicates a dangerous or even life-threatening condition such as heart disease so when loss of consciousness occurs it is important to figure out the cause.
There are many more symptoms such as fatigue, memory defects, and changes in skin tone and temperature.

III. Types of Heart Diseases
The heart is a four chambered, hollow muscle and double acting pump that is located in the chest between the lungs. Heart diseases caused by high blood pressure contributes to hardening of the arteries. High levels of bad cholesterol (LDL) build up in the arteries as a result of uncontrolled diet with high levels of saturated fat and trans fat. All these add to the formation of atherosclerosis lesions and eventually arterial blockage.
There are some major types of heart diseases:
1. Type of heart disease affecting heart chambers
As we mention in the previous article, the heart is a four chambered hollow muscle and double acting pump that is located in the chest between the lungs. Heart diseases caused by high blood pressure contributes to hardening of the arteries. High levels of bad cholesterol (LDL) build up in the arteries as a result of uncontrolled diet with high levels of saturated fat and trans fat. All these add to the formation of atherosclerosis lesions and eventually arterial blockage.
In this article, we will discuss heart disease affecting the heart chambers.
Heart failure is caused by the heart not pumping as much blood as it should and so the body does not get as much blood and oxygen that it needs. The malfunctioning of the heart chambers are due to damage caused by narrowed or blocked arteries leading to the muscle of your heart.
There are 4 heart chambers as follow:
* The right atrium
* The left atrium
* The right ventricle
* The left ventricle.
Heart diseases affect the heart chambers include:
A. Congestive heart failure
Heart failure is caused by the heart not pumping as much blood as it should and so the body does not get as much blood and oxygen that it needs. The malfunctioning of the heart chambers are due to damage caused by narrowed or blocked arteries leading to the muscle of your heart.
a) Diastolic dysfunction:
The contraction function is normal but there's impaired relaxation of the heart, impairing its ability to fill with blood causing the blood returning to the heart to accumulate in the lungs or veins.
b) Systolic dysfunction:
The relaxing function is normal but there's impaired contraction of the heart causing the heart to not pump out as much blood that is returned to it as it normally does as a result of more blood remaining in the lower chambers of the heart.

B. Pulmonary heart disease
Pulmonary heart disease is caused by an enlarged right ventricle. It is known as heart disease resulting from a lung disorder where the blood flowing into the lungs is slowed or blocked causing increased lung pressure. The right side of the heart has to pump harder to push against the increased pressure and this can lead to enlargement of the right ventricle.

2. Heart Disease affecting heart muscles
In the Case of heart diseases affecting heart muscles, the heart muscles are stiff, increasing the amount of pressure required to expand for blood to flow into the heart or the narrowing of the passage as a result of obstructing blood flow out of the heart.
Heart diseases affecting heart muscles include:
1. Cardiomyopathy
Heart muscle becomes inflamed and doesn't work as well as it should. There may be multiple causes such as high blood pressure, heart valve disease, artery diseases or congenital heart defects.
a) Dilated cardiomyopathy
The heart cavity is enlarged and stretched. Blood flows more slowly through an enlarged heart, causing formation of blood clots as a result of clots sticking to the inner lining of the heart, breaking off the right ventricle into the pulmonary circulation in the lung or being dislodged and carried into the body's circulation to form emboli .
b) Hypertrophic cardiomyopathy
The wall between the two ventricles becomes enlarged, obstructing the blood flow from the left ventricle. Sometimes the thickened wall distorts one leaflet of the mitral valve, causing it to leak. The symptoms of hypertrophic cardiomyopathy include shortness of breath, dizziness, fainting and angina pectoris.
c) Restrictive cardiomyopathy
The ventricles becomes excessively rigid, so it's harder for the ventricles to fill with blood between heartbeats. The symptoms of restrictive cardiomyopathy include shortness of breath, swollen hands and feet.
2. Myocarditis Myocarditis is an inflammation of the heart muscles or the weaken of the heart muscles. The symptoms of myocarditis include fever, chest pains, congestive heart failure and palpitation.

3. Heart disease affecting heart valves
Heart diseases affecting heart valves occur when the mitral valve in the heart narrows, causing the heart to work harder to pump blood from the left atrium into the ventricle.
Here are some types of heart disease affecting heart valves:
1. Mitral Stenosis
Mitral Stenosis is a heart valve disorder that involves a narrowing or blockage of the opening of the mitral valve causing the volume and pressure of blood in the left atrium increases.
2. Mitral valves regurgitation
Mitral regurgitation is the heart disease in which your heart's mitral valve doesn't close tightly causing the blood to be unable to move through the heart efficiently. Symptoms of mitral valve regurgitation are fatigue and shortness of breath.
3. Mitral valves prolapse
In mitral valve prolapse, one or both leaflets of the valve are too large resulting in uneven closure of the valve during each heartbeat. Symptoms of mitral valves prolapse are palpitation, shortness of breath, dizzy, fatigue and chest pains.
4. Aortic Stenosis
With aging, protein collagen of the valve leaflets are destroyed and calcium is deposited on the leaflets causing scarring, thickening, and stenosis of the valve therefore increasing the wear and tear on the valve leaflets resulting in the symptoms and heart problems of aortic stenosis.
5. Aortic regurgitation
Aortic regurgitation is the leaking of the aortic valve of the heart that causes blood to flow in the reverse direction during ventricular diastole, from the aorta into the left ventricle. Symptoms of aortic regurgitation include fatigue or weakness, shortness of breath, chest pain, palpitation and irregular heart beats.
6. Tricuspid stenosis
Tricuspid stenosis is the narrowing of the orifice of the tricuspid valve of the heart causing increased resistance to blood flow through the valve. Symptoms of tricuspid stenosis include fatigue, enlarged liver, abdominal swelling, neck discomfort and leg and ankle swelling.
7. Tricuspid regurgitation.
Tricuspid regurgitation is the failure of the right ventricular causing blood to leak back through the tricuspid valve from the right ventricle into the right atrium of the heart. Symptoms of tricuspid regurgitation include leg and ankle swelling and swelling in the abdomen.

4. Heart disease affecting coronary arteries and coronary veins
Heart disease affecting coronary arteries and coronary veins:
The malfunctioning of the heart may be due to damage caused by narrowed or blocked arteries leading to the muscle of your heart as well as blood backing up in the veins. Types of heart disease that affect the coronary arteries and veins include:
A. Angina pectoris
Angina pectoris occurs when the heart muscle doesn't get as much blood oxygen as it needs. Here are 3 types of angina pectoris:
a) Stable angina
Stable angina is chest pain or discomfort that typically occurs with activity or stress due to oxygen deficiency in the blood muscles and usually follows a predictable pattern. Symptom of stable angina include chest pain, tightness, pressure, indigestion feeling and pain in the upper neck and arm.
b) Unstable angina
Unstable angina is caused by blockage of the blood flow to the heart. Without blood and the oxygen, part of the heart starts to die. Symptoms of unstable angina include pain spread down the left shoulder and arm to the back, jaw, neck, or right arm, discomfort of chest and chest pressure.
c) Variant angina also known as coronary artery spasm
Caused by the narrowing of the coronary arteries. This is caused by the contraction of the smooth muscle tissue in the vessel walls. Symptoms of variant angina include increasing of heart rate, pressure and chest pain.
B. Heart attacks known as myocardial infarction or MI
Heart attacks caused by plaque rupture with thrombus formation in a coronary vessel, resulting in an acute reduction of blood supply to a portion of the myocardium. Symptoms of MI include a squeezing sensation of the chest, sweating, nausea and vomiting, upper back pain and arm pain.
C. Heart disease also known as coronary artery disease or coronary heart disease
Caused by arteries hardening and narrowing, cutting off blood flow to the heart muscle and resulting in heart attack. Symptoms of heart disease include shortness of breath, chest pains on exertion, palpitation, dizziness and fainting.
D. Atherosclerosis or hardening of arteries
Arteries are blood vessels that carry oxygen-rich blood to your heart and to other parts of your body. Atherosclerosis is caused by plaques that rupture in result of blood clots that block blood flow or break off and travel to another part of the body. Atherosclerosis has no symptom or warning sign.
E. Silent ischemia.
Ischemia is a condition in which the blood flow is restricted to a part of the body caused by narrowing of heart arteries. Silent ischemia means people have ischemia without pain. There is also no warning sign before heart attack.

5. Heart disease affecting heart lining
Rheumatic heart disease results from inflammation of the heart lining when too much fluid builds up in the lungs leading to pulmonary congestion. It is due to failure of the heart to remove fluid from the lung circulation resulting in shortness of breath, coughing up blood, pale skin and excessive sweating. Heart disease resulting from inflammation of either the endocardium or pericardium is called heart disease affecting heart lining.
Endocardium is the inner layer of the heart. It consists of epithelial tissue and connective tissue. Pericardium is the fluid filled sac that surrounds the heart and the proximal ends of the aorta, vena vava and the pulmonary artery.
1. Endocarditis
Endocarditis, which is an inflammation of the endocardium is caused by bacteria entering the bloodstream and settling on the inside of the heart, usually on the heart valves that consists of epithelial tissue and connective tissue. It is the most common heart disease in people who have a damaged, diseased, or artificial heart valve. Symptoms of endocarditis include fever, chilling, fatigue, aching joint muscles, night sweats, shortness of breath, change in temperature and a persistent cough.

2. Pericardium
Pericarditis is the inflammation of the pericardium. It is caused by infection of the pericardium which is the thin, tough bag-like membrane surrounding the heart. The pericardium also prevents the heart from over expanding when blood volume increases. Symptoms of pericarditis include chest pain, mild fever, weakness, fatigue, coughing, hiccups, and muscle aches.

6. Heart disease affecting electrical system
The electrical system within the heart is responsible for ensuring the heart beats correctly so that blood can be transported to the cells throughout our body. Any malfunction of the electrical system in the heart causes a fast, slow, or irregular heartbeat. The electrical system within the heart is responsible for ensuring that the heart beats correctly so that blood can be transported throughout our the body. Any malfunction of the electrical system in the heart malfunction can cause a fast, slow, or irregular heartbeat.
Types of heart disease that affect the electrical system are known as arrhythmias. They can cause the heart to beat too fast, too slow, or irregularly. These types of heart disease include:
a. Sinus tachycardia
Sinus tachycardia occurs when the sinus rhythm is faster than 100 beats per minute therefore it increases myocardial oxygen demand and reduces coronary blood flow, thus precipitating an ischemia heart or valvular disease.
b. Sinus bradycardia
Sinus bradycardia occurs when a decrease of cardiac output results in regular but unusually slow heart beat less than 60 beats per minute. Symptoms of sinus bradycardia includes a feeling of weightlessness of the head, dizziness, low blood pressure, vertigo, and syncope.
c. Atrial fibrillation
Atrial fibrillation is an irregular heart rhythm that starts in the upper parts (atria) of the heart causing irregular beating between the atria and the lower parts (ventricles) of the heart. The lower parts may beat fast and without a regular rhythm. Symptoms of atrial fibrillation include dizziness, light-headedness, shortness of breath, chest pain and irregular heart beat.
d. Atrial flutter
Atrial flutter is an abnormal heart rhythm that occurs in the atria of the heart causing abnormalities and diseases of the heart. Symptoms of atrial flutter includes shortness of breath, chest pains, anxiety and palpitation.
e. Supraventricular tachycardia
Supraventricular tachycardia is described as rapid heart rate originating above the ventricles, or lower chambers of the heart causing a rapid pulse of 140-250 beats per minute. Symptoms of supraventricular tachycardia include palpitations, light-headedness, and chest pains.
f. Paroxysmal supraventricular tachycardia
Paroxysmal supraventricular tachycardia is described as an occasional rapid heart rate. Symptoms can come on suddenly and may go away without treatment. They can last a few minutes or 1-2 days.
g. Ventricular tachycardia
Ventricular tachycardia is described as a fast heart rhythm that originates in one of the ventricles of the heart . This is a potentially life-threatening arrhythmia because it may lead to ventricular fibrillation and/or sudden death. Symptoms of ventricular tachycardia include light headedness, dizziness, fainting, shortness of breath and chest pains.
h.Ventricular fibrillation
Ventricular fibrillation is a condition in which the heart's electrical activity becomes disordered causing the heart's lower chambers to contract in a rapid, unsynchronized way resulting in little heart pumps or no blood at all, resulting in death if left untreated after in 5 minutes.

There are many heart diseases affecting electrical system such as premature arterial contractions, wolf parkinson, etc.
7. Congenital heart disease
There are several heart diseases that people are born with. Congenital heart diseases are caused by a persistence in the fetal connection between arterial and venous circulation. Congenital heart diseases affect any part of the heart such as heart muscle, valves, and blood vessels. Congenital heart disease refers to a problem with the heart's structure and function due to abnormal heart development before birth.Every year over 30,000 babies are born with some type of congenital heart defect in US alone. Congenital heart disease is responsible for more deaths in the first year of life than any other birth defects. Some congenital heart diseases can be treated with medication alone, while others require one or more surgeries.
The causes of congenital heart diseases of newborns at birth may be in result from poorly controlled blood sugar levels in women having diabetes during pregnancy, some hereditary factors that play a role in congenital heart disease, excessive intake of alcohol and side affects of some drugs during pregnancy.
Congenital heart disease is often divided into two types: cyanotic which is caused by a lack of oxygen and non-cyanotic.
A. Cyanotic
Cyanosis is a blue coloration of the skin due to a lack of oxygen generated in blood vessels near the skin surface. It occurs when the oxygen level in the arterial blood falls below 85-90%.
The below lists are the most common of cyanotic congenital heart diseases:
a)Tetralogy of fallot
Tetralogy of fallot is a condition of several congenital defects that occur when the heart does not develop normally. It is the most common cynaotic heart defect and a common cause of blue baby syndrome.
b)Transportation of the great vessels
Transportation of the great vessels is the most common cyanotic congenital heart disease. Transposition of the great vessels is a congenital heart defect in which the 2 major vessels that carry blood away from the aorta and the pulmonary artery of the heart are switched. Symptoms of transportation of the great vessels include blueness of the skin, shortness of breath and poor feeding.
c)Tricuspid atresia
In tricuspid atresia there is no tricuspid valve so no blood can flow from the right atrium to the right ventricle. Symptoms of tricuspid atresia include blue tinge to the skin and lips, shortness of breath, slow growth and poor feeding.
d)Total anomalous pulmonary venous return
Total anomalous pulmonary venous return (TAPVR) is a rare congenital heart defect that causes cyanosis or blueness. Symptoms of total anomalous pulmonary venous return include poor feeding, poor growth, respiratory infections and blue skin.
e)Truncus arteriosus
Truncus arteriosus is characterized by a large ventricular septal defect over which a large, single great vessel arises. Symptoms of truncus arteriosus include blue coloring of the skin, poor feeding, poor growth and shortness of breath.
There are many more types of cyanotic such as ebstein's anomaly, hypoplastic right heart, and hypoplastic left heart. If you need more information please consult with your doctor.

B. Non-cyanotic
Non-cyanotic heart defects are more common because of higher survival rates.
The below lists are the most common of non-cyanotic congenital heart diseases:
a)Ventricular septal defect
Ventricular septal defect is a hole in the wall between the right and left ventricles of the heart causing right and left ventricles to work harder, pumping a greater volume of blood than they normally would in result of failure of the left ventricle. Symptoms of ventricular septal defect include very fast heartbeats, sweating, poor feeding, poor weight gain and pallor.
b)Atrial septal defect
Atrial septal defect is a hole in the wall between the two upper chambers of your heart causing freshly oxygenated blood to flow from the left upper chamber of the heart into the right upper chamber of the heart. Symptoms of atrial septal defect include shortness of breath, fatigue and heart palpitations or skipped beats.

c)Coarctation of aorta
Coarctation of aorta is a narrowing of the aorta between the upper-body artery branches and the branches to the lower body causing your heart to pump harder to force blood through the narrow part of your aorta. Symptoms of coarctation of aorta include pale skin, shortness of breath and heavy sweating.
There are many more types of non-cyanotic such as pulmonic stenosis, patent ductus arteriorus, and atrioventricular cana. These problems may occur alone or together. Most congenital heart diseases occur as an isolated defect and is not associated with other diseases.

8. OtherTypes of Heart Diseases
In this article, we will discuss other types of heart diseases that can affect any part of the heart including the following:
*A cardiac tumor can be either malignant or benign
A) Benign tumors
a. Myxoma
Myxoma is a cardiac benign tumor. It is the most common tumor inside of cavities of the heart and most of them occur in the left atrium of the heart obstructing the normal flow of blood within the chambers of the heart. Symptoms of Myxoma include paroxysmal dyspnea, weight loss, feverhemoptysis, lightheadedness and sudden death.
b. Rhabdomyomas
Most of rhabdomyomas occur in children or infants and are associated with tuberous sclerosis. It develops in the myocardium or the endocardium and accounts for about one out of every five tumors that originate in the heart causing obstruction of blood flow, valvular insufficiency, and cardiac arrhythmias. Symptoms of rhabdomyomas include palpitations, chest pains, shortness of breath, and nausea.
c. Fibromas
Fibromas develop in the myocardium or the endocardium. These tumors are composed of fibrous or connective tissue and tend to occur on the valves of the heart and may be related to inflammation. Other than seeing or feeling the fibroma, there are no usual symptoms.
d. Teratomas of the pericardium
It is often attached to the base of the great vessels, usually occuring in infants. They are rarer than cysts or lipomas, usually causes no symptoms.
B) Malignant tumors
Malignant tumors that originated elsewhere in the body and spread to the heart are more common than ones that originate in the heart. Malignant heart tumors can originate from any heart tissue. They occur mostly in children.
a. Angiosarcomas
Angiosarcomas account for about a third of all malignant heart tumors and usually start on the right side of the heart. The cause of angiosarcomas is usually unknown and symptoms of angiosarcomas differ according to the location of the tumour. Often symptoms of the disease are not apparent until the tumour is well advanced.
b. Fibrosarcomas
Fibrosarcomas occur as a soft-tissue mass or as a primary or secondary bone tumor. The 2 main types of fibrosarcoma of bone are
i) Primary fibrosarcoma is a fibroblastic malignancy that produces variable amounts of collagen
ii) Secondary fibrosarcoma of bone arises from a preexisting lesion or after radiotherapy to an area of bone or soft tissue. Symptoms of fibrosarcomas include broken bone, pain, swelling, lump found under skin or bone, frequent urination and urinary obstruction.
c. Rhabdomyosarcomas
Rhabdomyosarcomas are a cancer made up of cells that normally develop into skeletal muscles of the body and are also more common in children. They usually have some type of chromosome abnormality in the cells of the tumor, which are responsible for the tumor formation. Symptoms of rhabdomyosarcomas include bleeding from the nose, vagina, rectum, throat and tingling, numbness, and pain.
d.) Liposarcomas
Liposarcoma normally appears as a slowly enlarging, painless, nonulcerated submucosal mass in a middle-aged person. Symptoms include palpation, weakness, limitation of motion weight loss, fatigue, and lassitude.
*Sudden cardiac death
The victim may or may not have diagnosis of heart diseases, and the death is totally unexpected. Sudden cardiac death is a result from abrupt loss of heart function. The cause of sudden cardiac dealth might be a result of coronary heart disease.
* Hypertensive heart disease
Hypertensive heart disease are caused by high blood pressure that increases the work load of the heart. Overtime the muscles of the heart become thick in result of an enlarged left ventricle and decreased blood pump from the heart. Symptoms of heart failure include shortness of breath, swelling in the feet, ankles, or abdomen, fatigue, irregular pulse, nausea and frequent urination at night.

IV. Heart Diseases- Prevention and Treatment
There are many causes of heart disease. Anything that serves to damage the inner lining of blood vessels and impedes the transportation of oxygen and nutrition to the heart can be defined as a risk of heart disease. Most heart diseases are preventable with a change of life style and healthy diet.
Unhealthy diet is a major cause of heart diseases resulting in the buildup of cholesterol and fat in the inner wall of arteries that narrows the arteries, impedes the circulation and eventually causes heart attacks.
1. Prevention and Treatment of Heart Disease with Diet
To prevent heart diseases, your daily diet should contain:
a) Fiber
Fiber can be soluble or insoluble. As we mentioned in a previous article, soluble fiber can lower your LDL and raise your HDL cholesterol while insoluble fiber has no effect on cholesterol but promotes regular bowel movements. The intake of fatty foods causes the liver to release bile into the intestines to break down the fat. The soluble fiber will help eliminate the bile instead of returning it to the blood resulting in reduced amounts of cholesterol in the blood.
b) Reduce intake of saturated fat and trans fat
We know that saturated and trans fat are toxins causing cholesterol to build up in the arteries damaging the arterial wall and narrows the arterial passage in result of poor circulation and oxygen transportation to our body in result of high blood pressure as the heart has to work harder than normal in order to provide enough nutrition to the body`s cells. Eventually, the heart will fail and result in heart diseases. It is recommended that you reduce the intake of animal fat and increase the intake of cold water fish which is the best sources of omega 3 and 6 fatty acids that can help your cholesterol levels as well as lowering your blood pressure.
c). Diet high in complex carbohydrates
Vegetables, fruits, some beans and grains contain high amounts of plant pigments known as flavonoids that provide healthy protection against heart diseases. Unfortunately study shows that diets high in complex carbohydrate may increase the release of too much insulin to respond to carbohydrates in the diet. The type and amount of carbohydrate foods may need individual Monitoring. Please consult with your doctor if you wish to include high amounts of complex carbohydrates in your diet.
d). Drink half of your body weight of water or juices in ounces
If you weigh 160 pounds then you are require to drink 80 ounces of water or juices to prevent the cells in our body to become dehydrated. Maintaining normal function of our body's cells is a healthy way to normalize high blood pressure.
2. Prevention and Treatment of Heart Disease with Foods
In order to lower the risk of heart diseases foods consumed in everyday diet become one of many important factors. Here are some foods that I have found can actually lower high blood pressure and levels of cholesterol resulting in lowering the risk of heart diseases
a) Fresh water algae
Fresh water algae contains chlorophyII-rich foods that is a powerful antioxidant for protection of build up of free radicals and restoring DNA of damaged cells. It also contains high amounts of Omega 3 and 6 fatty acids that can help to maintain normal blood pressure as well as cholesterol levels. Omega 3 and 6 fatty acids also inhibit blood clotting that causes the blockage of arteries and heart diseases.
b) Onions and garlic
Garlic and onions contain high amounts of sulfur compounds that not only help to improve circulation of blood but also help to keep your platelets from clumping together. Daily consumption of both garlic and onions help to keep blood pressure and cholesterol levels in healthy range. Be sure to talk to your doctor if you are taking any blood thinner medicines.
c) Nuts and seeds
Nuts and seeds contain high amounts of unsaturated fat and vitamin E. Unsaturated fat helps to prevent clots of arteries and lower cholesterol levels. Vitamin E, and the antioxidants beta varotene on the other hand stops bad cholesterol LDL from building up in the arteries, decreasing the risk of heart attacks.
d) Vegetables and fruits
Vegetable and fruits contain high amounts vitamins A, E, C and B. Vitamin E, the antioxidants beta carotene and vitamin C help to strengthen your small blood vessels and thins your blood so it can flow smoothly in result of lowering the risk of heart disease and strokes. Plums, tomatoes, and watercress are the best choices.
There are many more foods that can help to lower high blood pressure and cholesterol levels such as horsenut, grape juices, and apples. I hope this article will give you some ideas of choosing foods that help to restore your health and disease prevention.
3. Prevention and Treatment of Heart Disease with Nutritional Supplements
Heart diseases are caused by high blood pressure that contributes to hardening of the arteries. High levels of bad cholesterol (LDL) build up in the arteries as a result of uncontrolled diet with high levels of saturated fat and trans fat. Beside foods and herbs, nutritional supplements also play an important role in preventing heart diseases and stroke. Here are some nutritional supplements which have proven record in treating heart diseases:

1. L-Arginine
L-Arginine helps to increase the production of nitric oxide in our body, this has an anti-angina and anti-stress effect upon the arteries enabling the muscles in the arterial walls to relax. L-Arginine also helps to prevent the build up of plaque on the arterial walls. L- Arginne taken either orally or intravenously has been found to prevent and reverse atherosclerosis, improving the functional status of heart failure and increasing blood flow in heart disease patients.
2. L- Carnitine
L-Carnitine working with vitamin E will help the body to recover quickly from fatigue. L-Carnitine helps the body convert fatty acids into energy, which is used primarily for muscular activities throughout the body. When working with vitamin E, L-carnitine will help the body to recover quickly from fatigue and combat heart diseases.
3. Lecithin
Lecithin supplies the body with needed inositol, choline and phosphatidyl choline that help to maintain healthy arteries. Lecithin also helps to reduce plaque in the arteries, lower blood pressure and ameliorate angina pectoris.
4. Niacin
Niacin a B3 vitamin, helps decreases blood levels of cholesterol and triglycerides which may reduce the risk of atherosclerosis. Niacin can only be taken under medical supervision because of it's side effects.
5. Selenium
Selenium deficiency will cause increase in high blood pressure.
6. Taurine
Taurine is an amino acid that acts as an antioxidant helping to fortify cardiac contraction and enhance the outflow of blood from the heart. Intake of taurine will reduce the risk of congestive heart failure and arteriosclerosis.
7. Calcium and potassium
Calcium and potassium deficiency may result in heart palpitation.
8. Magnesium
Magnesium helps to improve blood circulation by permitting the muscles in the arterial wall to rest.
9. Lutein
Lutein is one of the carotenoids, yellow and orange pigments found in many fruits and vegetables. Lutein supplementation has already been proven in helping prevent muscular degeneration, the most common cause of irreversible blindness in the elderly. Study shows that increased dietary intake of lutein may protect against the development of early atherosclerosis. It also helps explain why diets rich in fruits and vegetables are associated with reduced risk of heart diseases.

4. Prevention and Treatment of Heart Disease with Herbs
There are many causes of heart disease. Anything that serves to damage the inner lining of blood vessels and impedes the Transportation of oxygen and nutrition to the heart can be defined as a risk of heart disease. Besides aspirin, foods, and diet there are some herbs which have proven record and have been used over thousands of years in the history of mankind that would help to lower the risk of heart diseases as follow:

1. Flax seeds
Flax seeds contain high amounts of alpha-linoenic acid that helps to lower high blood pressure and the risk of stroke. Eating too much flax seeds will cause gas to build up if you are not used to it.
2. Ginkgo biloba
Ginkgo biloba helps to to make blood less sticky and prevents blood clotting and stroke. Unlike aspirin, Ginkgo biloba will not cause upset stomach and internal bleeding. Also, Ginkgo biloba can improve blood circulation. Be sure not to take Ginkgo seeds because they are toxic and can cause seizures.
3. Cayenne
Cayenne stimulates blood flow, and strengthens the heart's metabolism. It also helps to improve blood circulation as well as the digestive and immune systems. Cayenne contains high amounts of beta-carotene, cobalt, essential fatty acids, niacin and zinc that helps circulatory stimulation, blood purification, detoxification and fatigue.
4. Mistletoe
Mistletoe can stimulate the heartbeat and increase cardiac output. It can help to relieve heart strain, stimulate circulation, and lower blood pressure. Do not overdose and eat mistletoe berriea, because it is toxic.
5. Hawthorn berry
Hawthorn berry contains high amount of flavonoids that help to provide direct nourishment to the heart as well as dilate the coronary arteries.
6.Bugleweeds
Bugleweeds help to alleviate heart palpitation and high blood pressure. Study shows that bugleweeds act chiefly on the blood vessels, and is especially useful in plethoric and inflammatory states, particularly internal inflammations, and cardiac diseases.
7 Motherwort
Motherwort can be used in secure cardiac electrical rhythm. Be sure to talk to your doctor before taking motherwort supplements.
8. Tansy
Tansy is used to help heart palpitations and also helps to improve blood circulation.
Remember that herbs help to lower high blood pressure and cholesterol levels will also help to prevent heart diseases and stroke.

4. Prevention and Treatment of Heart Disease with Chinese Herbs
You might have heard that "taking an aspirin a day will keep your heart attacks away". In fact Aspirin does help your heart, the salicyca acid in aspirin helps to keep blood cells from clumping together and sticking to the arterial wall. This reduces the risk of heart diseases. Besides aspirin, foods and herbs, in this article we will discuss what kinds of Chinese herbs traditional Chinese doctors use in treating heart diseases. Please note that Chinese medicines have been around for over 4,000 years well before the existence of western medicines.
Here are some Chinese herbs that have been used for treating heart diseases:
1. Nu zhen zi (privet fruit):
Nu zhen zi is the ying kidney and liver tonic that is the significant immune enhancement agent. Nu zhen zi also helps ying deficiency such as dizziness, floater, weak knee and enhancing heart blood.
2. Hong hua (safflower):
Hong hua is one of the Chinese herbs that have been used to break up blood stagnation and improve blood circulation. It is also used to unblock uterine stagnation.
3. Ru xiang (frankincense)
Ru xiang is used for thousand of years in treating joint pain, alleviating chest pain as well as breaking up blood stagnation and improving blood flow to the heart.
4. Mao yao (myzzh)
Mao yao contain elements that help to break up stagnation of blood resulting in improved blood circulation in our body.
5. Fu ling (poria)
Fu ling is a fungus that helps to enhance the immune system's ability to fight off viruses. It is used in Chinese medication for heart calming and palpitation smoothing.
6. Yin yang hou horney (goat weed)
Goat weed helps to lower high blood pressure and heart calming.
7. Du zhong (rubber tree bark)
Du zhong is consider the primary herb used to increase the yang function in the body resulting in benefits of the heart.
There are many more Chinese herbs that can help to lower bad cholesterol levels and high blood pressure as well as preventing and curing heart diseases such as xian fu, wu wei zhi, and da zhao.

5. Prevention and Treatment of Heart Disease with Herbs
As we mentioned in the previous articles, heart diseases are caused by high blood pressure that contributes to hardening and thinning of the arteries. High levels of bad cholesterol (LDL) builds up in the arteries as a result of uncontrolled diet with high levels of saturated fat and trans fat. In this article, we will discuss other types of heart diseases that can affect any part of the heart including the following:
I. A cardiac tumor can be either malignant or benign
A) Benign tumors
1. Myxoma
Myxoma is a cardiac benign tumor. It is the most common tumor inside of cavities of the heart and most of them occur in the left atrium of the heart obstructing the normal flow of blood within the chambers of the heart. Symptoms of Myxoma include paroxysmal dyspnea, weight loss, feverhemoptysis, lightheadedness and sudden death.
2. Rhabdomyomas
Most of rhabdomyomas occur in children or infants and are associated with tuberous sclerosis. It develops in the myocardium or the endocardium and accounts for about one out of every five tumors that originate in the heart causing obstruction of blood flow, valvular insufficiency, and cardiac arrhythmias. Symptoms of rhabdomyomas include palpitations, chest pains, shortness of breath, and nausea.
3. Fibromas
Fibromas develop in the myocardium or the endocardium. These tumors are composed of fibrous or connective tissue and tend to occur on the valves of the heart and may be related to inflammation. Other than seeing or feeling the fibroma, there are no usual symptoms.
4. Teratomas of the pericardium
It is often attached to the base of the great vessels, usually occuring in infants. They are rarer than cysts or lipomas, usually causes no symptoms.
B) Malignant tumors
Malignant tumors that originated elsewhere in the body and spread to the heart are more common than ones that originate in the heart. Malignant heart tumors can originate from any heart tissue. They occur mostly in children.
1. Angiosarcomas
Angiosarcomas account for about a third of all malignant heart tumors and usually start on the right side of the heart. The cause of angiosarcomas is usually unknown and symptoms of angiosarcomas differ according to the location of the tumour. Often symptoms of the disease are not apparent until the tumour is well advanced.
2. Fibrosarcomas
Fibrosarcomas occur as a soft-tissue mass or as a primary or secondary bone tumor. The 2 main types of fibrosarcoma of bone are
a) Primary fibrosarcoma is a fibroblastic malignancy that produces variable amounts of collagen
b) Secondary fibrosarcoma of bone arises from a preexisting lesion or after radiotherapy to an area of bone or soft tissue. Symptoms of fibrosarcomas include broken bone, pain, swelling, lump found under skin or bone, frequent urination and urinary obstruction.
3. Rhabdomyosarcomas
Rhabdomyosarcomas are a cancer made up of cells that normally develop into skeletal muscles of the body and are also more common in children. They usually have some type of chromosome abnormality in the cells of the tumor, which are responsible for the tumor formation. Symptoms of rhabdomyosarcomas include bleeding from the nose, vagina, rectum, throat and tingling, numbness, and pain.
4.) Liposarcomas
Liposarcoma normally appears as a slowly enlarging, painless, nonulcerated submucosal mass in a middle-aged person. Symptoms include palpation, weakness, limitation of motion weight loss, fatigue, and lassitude.
II. Sudden cardiac death
The victim may or may not have diagnosis of heart diseases and the death is totally unexpected. Sudden cardiac death is a result from abrupt loss of heart function. The cause of sudden cardiac dealth might be a result of coronary heart disease.
III. Hypertensive heart disease
Hypertensive heart disease are caused by high blood pressure that increases the work load of the heart. Overtime the muscles of the heart become thick in result of an enlarged left ventricle and decreased blood pump from the heart. Symptoms of heart failure include shortness of breath, swelling in the feet, ankles, or abdomen, fatigue, irregular pulse, nausea and frequent urination at night.
6. Prevention and Treatment of Heart Disease - Aspirin: Friend or Foe ?
Besides cancer, heart disease kills more than 2,000 Americans everyday. Approximately 60 million Americans have heart disease. There are many causes of heart disease. Anything that serves to damage the inner lining of blood vessels and impedes the transportation of oxygen and nutrition to the heart can be defined as a risk of heart disease. You might have heard "taking an Aspirin a day will keep your heart attacks away". In fact, Aspirin does help your heart. the salicyca acid in aspirin helps to keep bloods cells from clumping together and sticking to the arterial wall. This reduces the risk of heart diseases. Here are some reasons to be cautious about aspirin therapy.
Before discussing the benefits and side effects of aspirin, there are some people who should not take aspirin. These include:
a. Allergies to ASA
b. last trimester of pregnancy
c. prone to bleeding
d. has an active peptic ulcer
e. taking blood thinner medication.
1. Aspirin indeed helps your blood from clotting. If you suffer any bleeding, taking aspirin will make bleeding harder to stop. Study show that aspirin might increase the bleeding complication. If you are taking any blood thinner medication or you have an ulcer, please consult with your doctor before taking aspirin. For people suffering from hemorrhages (this is the loss of blood from the circulatory system or internal bleeding taking aspirin) they would do more harm than good.
2. Aspirin increases the risk of bleeding and hemorrhagic strokes that are caused by blood vessels bursting in or around your brain. Therefore do not assume that taking an aspirin a day would do no harm. Please consult with with your doctor before starting aspirin therapy.
3. Study shows that aspirin does not work well with people with high cholesterol levels. People with cholesterol levels over 220 respond poorly to aspirin therapy. Therefore, if your cholesterol level is over 220 you might need to find some other therapy to lower the risk of heart diseases.
Aspirin also causes some side affects such as heartburn, indigestion and mild-to-moderate abdominal or stomach cramps.

7. Prevention and Treatment of Heart Disease- Fat : Friend Or Foe
As we discussed in previous articles, we know that heart disease kills more than 2,000 Americans everyday. Approximately 60 million Americans have heart disease. It is caused by uncontrolled diet that is high in saturated and trans fat resulting in arteries being clogged up by bad cholesterol LDL and the inner lining of blood vessels being damaged,impeding the transportation of oxygen and nutrition to the heart. The general public has always had a misunderstanding of the meaning of the word "fat". For them "fat" is bad for your health, causing things like heart diseases and making you overweight. In fact, fat plays an important role in your daily health, if you how to choose the right kind of fat to be included in your daily diets. In this article, we will discuss 4 types of fat and whether or not they are friend or foe.
1. Saturated fat
Saturated fats have a chemical makeup in which the carbon atoms are saturated with hydrogen atoms. Saturated fats are typically solid at room temperature. Eating saturated fats will increase both low density lipoprotein LDL (bad cholesterol) and high density lipoprotein (good cholesterol) levels. Therefore eating more saturated fat will cause cholesterol to clog up arteries. Limit your daily intake of no more than 7% calories will lessen the chance of heart disease. In fact saying that animal fats is the same as saturated fats is very misleading, as many animal fats are actually more than 50% unsaturated, and chicken fat is actually 70% unsaturated. Foods containing high saturated fat include meats, butter, whole milk, cheese, and coconut oil.
2. Trans fat
Trans fats are found naturally in some animal-based foods, but are also formed when liquid oils are made into semi-solid fats like shortening and hard margarine. Study shows that dietary saturated and trans fats can increase your risk of developing heart disease. Trans fats raise LDL and lower HDL cholesterol, increasing the risk of heart diseases and stroke. Foods containing high amounts of trans fat include margarine and vegetable shortening.
3. Monounsaturated fat
Monounsaturated fat is the healthiest type of fat. It helps to lower the bad cholesterol LDL and increase good cholesterol HDL, in some Cases cleanses the bad cholesterol in the arteries and blood vessels. Foods containing high amounts of monounsaturated fat include olive oil, peanut oil canola oil, and nuts.
4. Polyunsaturated fat
Polyunsaturated fats are typically liquid at room temperature and when chilled. Polyunsaturated fats can reduce both LDL and HDL cholesterol levels in your blood, lowering the risk of heart disease. Foods containing high amounts of polyunsaturated fat include vegetable oils, corn, and sunflower. Be aware that too much of polyunsaturated fat might increase the risk of cancer.
By replacing your daily consumption of saturated and trans fat with monounsaturated fat and polyunsaturated fat or eating less saturated and trans fat, you are ensuring yourself healthy cholesterol levels and blood pressure in result of lowering the risk of heart diseases and strokes.
7. Prevention and Treatment of Heart Disease- Dairy Products: Friend Or Foe
As mentioned in the previous articles, we know that approximately 60 million Americans have heart disease. It is caused by uncontrolled diets high in saturated and trans fat resulting in arteries being clogged up by bad cholesterol LDL and the inner lining of blood vessels being damaged impeding the transportation of oxygen and nutrition to the heart. There are many opinions about pros and cons of dairy products in our diet. Would it also be the cause of cholesterol building up in the arteries, high blood pressure and heart diseases? In this article, we will discuss dairy products: friend or foe?
Diary products which contain lactose are products made from milk including cheese, yogurt, and butter that have been part of the human diet for years. They play an important role in a healthy diet, both for nutritional value and personal enjoyment but also contains elements that can cause cholesterol to build up in the arteries and high blood pressure resulting in heart diseases.
Study shows that milk drinkers are no more likely to die of a heart disease than non milk drinkers. In fact drinking less than 4 cups of milk a day actually lessens the chance of dying of any cause.
Since milk contains high saturated fat, by selecting skim or low fat milk it not only helps to lessen the chance of heart attack but also benefits from the nutritional supplements and minerals contained in milk.
Other dairy products that we would like to mention here are eggs. Eggs get a bad name for high cholesterol content. Study shows that eating one egg a day does not increase the risk of heart attack or stroke, unless you are diabetic. Eggs contain high amounts of B vitamins, vitamin A, D, and E that are vital for a healthy heart.
Besides milk and eggs, there are other dairy products such as cheese and butter. Statistics show that North Americans eat nearly 3 times more cheese than they did 30 years ago. Cheese contains high amounts of calcium but also high amounts in saturated fat which is the main cause of cholesterol build up in the arteries, and high blood pressure resulting in heart diseases and stroke. In fact if you can cut the amount of cheese and butter consumed daily by half and replace them with low fat cheese you will limit your risk of heart attack. For best protection, be sure to limit your cheese intake to less than 2 ounces a week.
By all means, choosing low fat and limiting your daily intake of dairy products will not only limit the risk of heart disease but also help your body to absorb the needed nutrition as result of better health.
8. Heart Diseases---How to Treat Heart Diseases with Chelation Therapy
As we mentioned in the previous articles, heart diseases are caused by uncontrolled diets high in saturated and trans fats resulting in arteries being clogged up by bad cholesterol LDL and the inner lining of blood vessels being damaged impeding the transportation of oxygen and nutrition to the heart.
People with heart diseases using this type of therapy must be carefully selected and approved by their doctors. The prime candidate is people at their 40's and people already suffering from advanced forms of heart disease such as angina and intermittent claudication, because the people in this age group will experience some form of heart disease caused by excessive cholesterol intake and build up of calcium, scar tissues and fat within the arteries.
This form of chelation therapy includes the usage of an IV apparatus and EDTA that is a widely used abbreviation for the chemical compound ethylenediaminetetraacetic acid. EDTA, the chelation agent, not only helps to clean the harmful substances such as lead, uranium, nickel and calcium deposited in the arterial wall but also improves circulation, enhances the immune system and inhibits the creation of free radical. With the slow flow of EDTA from the bottle through the IV and finally into the patient's vein and bloodstream results in turning back the clock for many potential heart disease victims. Chelation therapy is not only helpful as an attractive alternative to bypass surgery, but also has the ability to improve the function of the brain, since this form of therapy is especially helpful in treating arterial blockage in the upper body.
Other benefits of chelation therapy include: reduction of liver-produced cholesterol, lowered cholesterol levels, reducing high blood pressure, and fewer excessive heart contractions.
With all the success in chelation therapy, it also produces some side effects for some people such as headaches, diarrhea, fainting, fatigues, fever, and cramps. Be sure you understand all these problems before taking chelation therapy.
I hope this information will help. If you need more information of the above subject, please visit my home page at:
Kyle J. Norton
http://medicaladvisorjournals.blogspot.com/
http://healtharticles-heartdiseases.blogspot.com/
All rights reserved. Any reproducing of this article must have all the links intact.

Heart Diseases- Causes, Symptoms,types, Prevention & Treatment of Heart Diseases

!: Information Electric Blower